PxPlus User Forum

Twitter Twitter Twitter

Author Topic: PVXPLUS 12 licensing with FacetTerm - problem  (Read 1790 times)

CHC_RH

  • New Member
  • *
  • Posts: 2
    • View Profile
PVXPLUS 12 licensing with FacetTerm - problem
« on: December 18, 2019, 04:40:56 PM »
I would really appreciate any comments or ideas regarding the PVXPLUS with FacetTerm.  We were running properly until we had machine damage and recovered.  We are running under LINUX (Fedora 31).  We had a drive failure due to water inside the machine and had to recover the data and programs. 

Everything works well, except for the license count for FacetTerm windows.  I must have missed something or messed up permissions somewhere.  It used to work before the recovery.


This is what I've looked at so far


In the profile:-
   export FACETTYPE=vt100

In the START_UP
   SET_PARAM '1U'=0


When the FacetTerm windows start, they consume 1 license per window instead of 1 for the user.  When I look at the '1U' it is 1
   ?prm ('1U')
   1

It did not keep the setting from the START_UP.  I verified that I was using the correct START_UP program entry.   I also tried using     SET_PARAM -'1U'
That didn't change either.
If I look at the FIN(0,"TRUE_TTY") I see entries such as /dev/pts/14 for the first FacetTerm window and /dev/pts/15 for the second, etc.

Mike King

  • Diamond Member
  • *****
  • Posts: 3810
  • Mike King
    • View Profile
    • BBSysco Consulting
Re: PVXPLUS 12 licensing with FacetTerm - problem
« Reply #1 on: December 18, 2019, 04:54:39 PM »
Why are you setting the 1U parameter?

It should not really be changed by your application unless you want to force a single user slot.
(Once set it cannot be undone).

PxPlus internally will set the 1U based on whether the user is shareable or not.  When using Facet term we rely on the encrypted results from the fct_info command to determine if the user is shared.

Perhaps this should contact our support department at https:/helpdesk.pvxplus.com to see if they can assist (assuming you are using a supported product :D)
Mike King
President - BBSysco Consulting
eMail: mike.king@bbsysco.com

CHC_RH

  • New Member
  • *
  • Posts: 2
    • View Profile
Re: PVXPLUS 12 licensing with FacetTerm - problem
« Reply #2 on: December 18, 2019, 05:52:27 PM »
Hello Mike,

SOLVED!   :)
Thank you so much for the speedy response and you gave me the answer I needed to solve the problem.
The /usr/bin/fct_info   was missing after the recovery.  I just restored it, ran tests and everything works perfectly now.  I really appreciate your help and the effort you put into helping people.  I can relax now that the users will be happy again.
I'm not touching the '1U' parameter now.  I was getting desperate and trying everything at that time.

Best Regards & happy holidays. 

Mike King

  • Diamond Member
  • *****
  • Posts: 3810
  • Mike King
    • View Profile
    • BBSysco Consulting
Re: PVXPLUS 12 licensing with FacetTerm - problem
« Reply #3 on: December 19, 2019, 07:48:09 AM »
Glad to hear you were able to get everything up and running.

Long term You might want to consider switching to WindX as it has built in logic to handle multiple sessions and provides many more features such as file sharing, remote execution, security, and graphical interfaces.

Happy holidays and best wishes for 2020
Mike King
President - BBSysco Consulting
eMail: mike.king@bbsysco.com