PxPlus User Forum

Twitter Twitter Twitter

Author Topic: When starting a program the panel is not visible on screen  (Read 1323 times)

Floris Netten

  • New Member
  • *
  • Posts: 1
    • View Profile
When starting a program the panel is not visible on screen
« on: July 04, 2018, 04:33:25 AM »
Hi all,

when users start a program with a panel, sometimes the panel is not visible on screen. Mostly it is "below"  the screen, the only way to get it shown is to move the panel into the screen.
Unfortunately the programs it happens to differ from user.

We mostly use multiple monitor setups and windows 7 as os, we use the windx client

Anybody has experience with these hidden panels?

Tino

  • Member
  • **
  • Posts: 6
    • View Profile
Re: When starting a program the panel is not visible on screen
« Reply #1 on: July 04, 2018, 08:06:35 AM »
Floris,

What version of pxplus ?
Do you use  *winpnl?    if yes, locate the record in *win/panel.inf that corresponds to that user/panel/library  and remove that record.

Regards,
Tino



Mike King

  • Administrator
  • Diamond Member
  • *****
  • Posts: 3436
  • Mike King
    • View Profile
    • PVX Plus Technologies
Re: When starting a program the panel is not visible on screen
« Reply #2 on: July 04, 2018, 05:44:07 PM »
Generally when a panel is started by Nomads, the position is determined either by its last panel position (assuming you have persistence enabled -- see below) or the settings on the panel header.

On the panel header you can specify the location of the panel and a line/column specification.  There are three options:

  • ABSOLUTE:  The panel will be positioned on the current monitor at the line/column specified.  The current monitor will be the main monitor for the initial screen or the monitor in use if you currently have a panel/window being displayed.
  • RELATIVE: The panel will be positioned using the line/column values as relative positions based on the current panel/window being displayed.  If no windows is displayed, then the position will be relative top of the screen.  (Note: There is almost ALWAYS a windows logically present even if it is minimized as PxPlus creates a main window during start up and preserves it last location automatically)
  • CENTERED: The Line/Column values are ignored.  The panel is displayed centered on the current display.

Panel Persistence
Nomads provides the ability for the system to remember where you last placed a panel and will attempt to restore it to the same position.  This is done generally by setting %Nomads'Panel_Info_Prog$ (%Nomad_Panel_Info_Prog$) to the name of program which will save and recall the panel position. 

We supply a program "*winpnl" that does this for you.  It preserves the last location a panel was placed by user id in the file called "panel.inf".  Simply call *winpnl prior running any Nomads based application and the system will enable persistence.

You can write your own program to do the same if desired, but generally *winpnl provides the necessary functionality.

Your Problem
You indicated that the position is wrong.  Is it possible that you have multiple workstations using the same user id?  This could cause confusion if you are using the standard *winpnl program.


« Last Edit: July 05, 2018, 09:36:06 AM by Mike King »