After a bunch of trial and error, I've been able to get (most of) our Nomads panels to scale everything fairly well; this tracks pretty well along the lines of the text-based windows from our legacy software. (Most of the users run maximized text windows, or close to it.) The thing that doesn't do so well is a check_box with right-justified text to the left of the box.
I asked this last year, and got an answer from Mike King, which looked good, but involved a bit more work than I was in a position to do at the time. Also, our scaling wasn't happening, so just setting the positions and sizes for 100% worked well. It was put on the back burner.
Now that we've got a few things going "right", I've revisited the situation. Following his instructions, I've got it doing pretty well, but the images I'm using get shrunk REALLY small - see attached. The large checkbox is the standard one used by PxPlus. The small one is from the library: {!32X32/Controls/Check_Box_Blue}
When I scale up the window, it starts to approach reasonable size and position. But at 100% (this sample), the image is tiny, and the spacing to the text is rather large (compared to the Fonted Text above in the sample). If I use a base library image (not 32X32), the 100% image is OK, but stays that size when scaled, so it looks tiny against the enlarged fonts.
The Attribute settings for this are: Tab Stop, Button to the Right of Text, Flat Button, Flat - No Border, and Transparent. Is there anything I'm missing to get this looking decent throughout the range of sizes?
Thanks, all!